TableLegsOnline

Vault-400 Stainless Steel Foot ring is designed for 3" column diameters. It "vaults" up the column 9-3/4" and sports a 15-3/5" overall diameter. The tubing is 3/5" diameter. Perfect for bar...

Cast iron Foot ring is designed for 3"  column diameters for the following cast iron table bases: 9550 9600 It slides onto the base column. Intended for bar height bases. Height: 9-3/4"...

Designed specifically to work with the following cast iron table bases, our cast iron foot ring can also be used with most other 3" column table bases: 9550 9600 9610 RADIANT25 SUN35 It slides onto...

Designed for use with all table bases using a 1/4"-20 thread size, these levelers automatically adjust up to 5/16" with it's hydraulic mechanism, which keeps all contact points touching the...

The Cast Iron Accessory Hook allows for safer hanging and more secure purse, pokectbook or handbag storage in any restaurant, bistro or bar setting. This add-on feature provides more security...

This caster allows for easy mobility while having a stylish look. The high quality and very stylish caster features a locking mechanism and a large wheel for easy movement. This leg is easy to...

Our A3000 is a M10 threaded insert for levelers. Size: M10 Material: Steel Length: 5/8" Outer diameter: 3/4" Inner diameter: 5/8" Sold as single

This is a steel threaded M10 leveler with a nylon base. Height: 1-5/8" (41mm) Foot diameter: 1-5/16" (34mm) Thread type: M10 - 1.5mm Thread length: 1-1/4" (31mm) Thread material: Steel Foot...

Our A4100 is a M8 fastening T-Nut. Size: M8 Material: Steel Length: 7/16" Outer diameter: 7/8" Inner diameter: 7/16" Sold as singles

Our T516 is a 5-1/16" fastening T-Nut. Size: 5/16" Material: Steel Length: 7/16" Outer diameter: 7/8" Inner diameter: 5/16" Sold as single

Our T1420 is a 1/4" x 20 fastening T-Nut. Size: 1/4" x 20 Material: Steel Length: 5/16" Outer diameter: 3/4" Sold as single

Our A3100 is a M10 fastening T-Nut. Size: M10 Material: Steel Length: 7/16" Outer diameter: 1" Inner diameter: 1/2" Sold as single

This is a steel threaded M10 leveler with a plastic base. Thread size: M10 Height: 1-3/8" Diameter: 1-3/16" Sold as single

Specifically designed to conceal the floor mounting plates of our 2-3/8" diameter bolt down legs, the 304 grade stainless steel cover plates will give a sharp, crisp, decorative appeal to an...

Washer for installing casters to 60MM legs.  Provides support and distributes pressure from caster body to caster stem and leg structure. Size: 2-3/8" Material: Steel Inner...

These panel clips allow you to create your own modesty panels. Picture above shown using a white melamine board as the panel. For use with our 2-3/8" diameter legs Set of (4) per polybag

Our F3707 is a M10 threaded mounting plate used to attach hardware, such as table legs, levelers, or casters. Thread: M10 threaded Material: Zinc, plated with steel thread Finish: Zinc Size: 1-7/8"...

Our F4100 is a corner leg bracket designed to attach table legs to a frame with the ends of the brace set into grooves. The table leg is then secured using the center hole. Size: V-shaped 2-7/8" x...

The Linkit table top connector is used to connect table tops. This connector mounts to the underside of the table top and can be used with a wide variety of tables, for multiple sizes and...

Using two of our SL5250 Cast Iron T-shaped bases per table top, is a cost effective solution for supporting longer rectangular table tops. The two-prong design provides excellent support while...