Miscellaneous

These mounting plates can help strengthen and/or repair new or existing furniture by attaching them to the bottom of the furniture frame. The 5/16-18″ bolts, pre-installed in our new furniture legs and feet, will fit perfectly into these top plates...

Washer for installing casters to 60MM legs.  Provides support and distributes pressure from caster body to caster stem and leg structure. Size: 2-3/8" Material: Steel Inner diameter: M10 hole for M10 caster stud Sold as...

Anti-Sag Stiffeners will help keep your tables as straight and true as they were on the day they were put together.Length: 31", 37", 43", 49", 55", 61", 67", 73", 79", 85" Measures: 1-7/8" width x 3/4" thickMaterial: Fabricated SteelFinish: BlackRequires...

Our F4100 is a corner leg bracket designed to attach table legs to a frame with the ends of the brace set into grooves. The table leg is then secured using the center hole. Size: V-shaped 2-7/8" x 3/16" x 2-7/8" Thickness: 2/8" Material: Galvanized...

These mounting plates can help strengthen and/or repair new or existing furniture by attaching them to the bottom of the furniture frame. The 5/16-18″ bolts, pre-installed in our new furniture legs and feet, will fit perfectly into these top plates...

These panel clips allow you to create your own modesty panels. Picture above shown using a white melamine board as the panel. For use with our 2-3/8" diameter legs Set of (4) per polybag

Our F3707 is a M10 threaded mounting plate used to attach hardware, such as table legs, levelers, or casters. Thread: M10 Material: Zinc, plated with steel thread Size: 1-7/8" x 1-7/8" Thickness: 1/8" Sold as single

These mounting plates can help strengthen and/or repair new or existing furniture by attaching them to the bottom of the furniture frame. The 5/16-18″ bolts, pre-installed in our new furniture legs and feet, will fit perfectly into these top plates...