Accessories

Our T1420 is a 1/4" x 20 fastening T-Nut. Size: 1/4" x 20 Material: Steel Length: 5/16" Outer diameter: 3/4" Sold as single

Our A3100 is a M10 fastening T-Nut. Size: M10 Material: Steel Length: 7/16" Outer diameter: 1" Inner diameter: 1/2" Sold as single

Specifically designed to conceal the floor mounting plates of our 2-3/8" diameter bolt down legs, the 304 grade stainless steel cover plates will give a sharp, crisp, decorative appeal to an otherwise industrial application. With a 7" overall diameter,...

Washer for installing casters to 60MM legs.  Provides support and distributes pressure from caster body to caster stem and leg structure. Size: 2-3/8" Material: Steel Inner diameter: M10 hole for M10 caster stud Sold as...

These panel clips allow you to create your own modesty panels. Picture above shown using a white melamine board as the panel. For use with our 2-3/8" diameter legs Set of (4) per polybag

Our F3707 is a M10 threaded mounting plate used to attach hardware, such as table legs, levelers, or casters. Thread: M10 threaded Material: Zinc, plated with steel thread Finish: Zinc Size: 1-7/8" x 1-7/8" Thickness: 1/8" Sold as single  

Our F4100 is a corner leg bracket designed to attach table legs to a frame with the ends of the brace set into grooves. The table leg is then secured using the center hole. Size: V-shaped 2-7/8" x 3/16" x 2-7/8" Thickness: 2/8" Material: Galvanized...

The Linkit table top connector is used to connect table tops. This connector mounts to the underside of the table top and can be used with a wide variety of tables, for multiple sizes and shapes to get a strong connection.Size: 3" x 4-3/4"...