16-3/4" Tall Folding Bench Legs

(2 reviews) Write a Review


These folding table legs are great for folding benches or wherever a shorter height is needed. The wider base spread of these legs make them very stable and secure.  Can be used for stage platforms (requires 2 sets per 4' X 8' sheet).  Legs are available in case pricing and can be custom cut cut upon request.

  • Height: 16-3/4"
  • Finish: Black
  • Diameter: 1"
  • Width: 15-3/4" (overall)
  • Width: 7"  (between vertical bars)
  • 10" between screw holes on brackets
  • 660 lbs. (300kg) vertical load rating per leg
  • Legs can be cut at the bottom section.  Maximum amount that can be cut is appoximately 3"
  • Sold as pairs, which is enough for one table
  • Case pricing available, simply enter the number of sets required into the shopping cart (20 sets per case)

View AllClose

Additional Information

Not recommended
Diameter / Width (Leg):
Folding Legs
Height Adjustment:
No Height Adjustment
Load Rating:
660 lbs (300kg) static vertical load
Metal / Steel
Integrated mounting plate
Packing Units:
View AllClose

2 Reviews

  • 5
    14" table legs

    Posted by Larry Houser on Mar 5th 2022

    These legs are very good and solid. There is no movement when fully opened. There are not instructions included. Because of this, it is a little hard to see how it should be installed. There are two key points to remember when installing (I think). First, when planning where to mount the fastening points, the legs should be fully opened, locked and the leg vertical using a level. The support brackets - be careful NOT to get them too close together. This will cause it to be difficult to lock in place. Last, in this picture (left) you see the cross brace between the two supports. When installed and closed, this cross brace should be between the mounting bracket plates of the legs, Not down toward the floor end. Once installed, they do very well.

  • 5
    Bench legs

    Posted by Rhonda E. on Feb 18th 2018

    Nice product.

View AllClose